Fabric & Material Specifications
 | ATPV RATING STANDARD IEC 61482-1-1:2019 | Garments depicting this icon are a Hazard Risk Categories2 or Personal Protection Equipment Class2 (PPE2) and have an Arc Thermal Protection Value equal too or greater than 8cal/cm2 |
 | FR REFLECTIVE TAPE | FR-Silver Reflective tape offers excellent flame retardant protection. |
 | LIMITED FLAME SPREAD ISO 15025:2016 METHOD A STANDARD ISO 11612:2015 A1 | In the event of an incidental exposure to flame, the fabric will not ignite, create a hole or melt. |
 | SMALL MOLTEN METAL SPLASH ISO 11611:2015 STANDARD ISO 9150:1988 | Able to withstand a minimum of 25 drops of small molten metal splash on the fabric. |
 | RESISTANCE OF MATERIALS TO PENETRATION BY LIQUID EN 14325 REPELLENCY & PENETRATION INDEX: 3 STANDARD EN 13034:2005+A1:2009 | The fabric has a Class3 repellency that is greater than 95%. Including Class3 penetration that is less than 5% for at least four different types of liquid chemicals. Liquid chemicals: H2SO4 NaOH C8H10 C4H10O. |
 | CHARGE DECAY EN 1149-5:2018 STANDARD ISO 1149-3:2004 (METHOD 2, INDUCTION CHARGING) | The time needed to dissipate a certain percentage of charge induced on the surface of material is less than 4 seconds. |
 | WATER PENETRATION RESISTANCE | These fabrics have a water resistant woven outer layer and PU coated inner layer that is engineered especially to be water resistant. |
 | AS/NZS1906.4:2010 HI VISIBILITY MATERIA | This garment is suitable to be worn around high risk environments where the person needs to be seen at all times during times by personal using moving machinery and vehicles. |
 | NENS 09 | This is a guideline, not a standard. It is an industry based document that has been set up by the Energy Network Association (ENA) and addresses a minimum performance level of clothing against electric arc hazards that may be encountered during the operation, construction and maintenance of electrical apparatus within the National Electrical Network Supply (NENS). |
 | NFPA 2112 | NFPA 2112 is intended to be referenced by those responsible of purchasing industrial FR work clothing. The standard provides a minimum requirement for personal protection when used in areas at any risk of short-duration thermal exposure from flash fire. |
 | NFPA 70E®, STANDARD FOR ELECTRICAL SAFETY IN THE WORKPLACE®. | The focus of NFPA 70E is more about protecting the employee who is put at risk of an injury from electrical hazards. It is a standard to help employees and employers address the right levels of safety within the workplace. |